Optimization Based on Convergence Velocity and Reliability for Hydraulic Servo System

This article presents an optimal hybrid fuzzy proportion integral derivative (HFPID) controller based on combination of proportion integral derivative (PID) and fuzzy controllers, by which the parameters could be evaluated by global optimization either in convergence velocity or in convergence reliability. Focusing on the nonlinear factors of hydraulic servo system, this article takes advantage of PID and fuzzy logic controller integrated with scaling factors to acquire precise tracking performances. To further improve the performances, it provides new developed optimization with rapid convergence to attain reliable approach probability. Focusing on the performance indictors of evolutionary algorithm, this article presents a new technique to predict reliability of the optimization algorithm. Statistics authenticates the effectiveness and robustness of the optimization. Further, many simulation and experimental results indicate that the optimal HFPID could acquire perfect immunity against parametric uncertainties with external disturbance.     

A FINITE ELEMENT SOLVER FOR NAVIER-STOKES EQUATIONS VIA VORTICITY AND VELOCITY

INTRODUCTIONThe stationary incompressible Navier- Stokesequations in the primitive variables( velocity uand pressure p)- vΔu + u . u + p =f . u =0u =g　inΩinΩonΓ( 1 )whereΩ is a set of R2 ,Γ its boundary,v thekinematic viscosity of the fluid,f a field of givenbody forces,and g a given field defined onΓ sa-tisfying the global conservation property∫Γg . n =0 ( 2 )n denotes the unit outer normal vector toΓ.The vorticity- velocity system of Eq.( 1 ) ,byintroducing the vorticityω…     

AN IMPROVEMENT FOR LOWER－ORDER PANEL METHOD BASED ON THE DIRICHLET BOUNDARY CONDITION

ＡＮＩＭＰＲＯＶＥＭＥＮＴＦＯＲＬＯＷＥＲ－ＯＲＤＥＲＰＡＮＥＬＭＥＴＨＯＤＢＡＳＥＤＯＮＴＨＥＤＩＲＩＣＨＬＥＴＢＯＵＮＤＡＲＹＣＯＮＤＩＴＩＯＮＸｕＭｉｎｇｃｈｕ，ＧｕＷｅｎｙｉｎｇ（ＮｏｒｔｈｗｅｓｔｅｒｎＰｏｌｙｔｅｃｈｎｉｃａｌＵｎｉｖｅｒ...     

考虑输入饱和与姿态角速度受限的航天器姿态抗退绕控制

 针对航天器姿态控制过程中同时存在输入饱和与姿态角速度受限的问题,提出了一种新型的姿态控制设计方法。该方法在保证系统渐近稳定的前提下,能够显式地给出输入力矩和姿态角速度的最大幅值,并通过引入一个时变锐度参数来增强系统对外部干扰的抑制能力;在此基础上,进一步考虑了由于四元数的冗余性所导致的退绕问题,设计了一组新的姿态偏差函数和偏差向量,使得控制器在满足上述约束的同时还具有抗退绕的优点。仿真结果表明,所提算法能够同时满足输入饱和与姿态角速度受限的约束,并且在较大外部干扰的情况下表现出了很强的鲁棒性,同时成功地规避了退绕现象。该算法为存在多重约束的航天器姿态控制问题提供了一个新的思路和解决方案,具有很好的实际应用价值。     

用Kane方法建立末敏弹减速和稳态扫描段模型

引入多刚体运动模型，详细分析了伞刚体和弹刚体的受力和运动特性，运用Kane方法建立末敏弹在减速运动和稳态扫描段的完整运动模型，并进行数字仿真，仿真结果与实验结果有很好的一致性，并充分显示了该模型在数字仿真中的优越性。     

热膜技术在水流测速中的应用研究

研究了在我国现有条件下，利用普通自来水，在室内和试验水槽中不设调温装置的情况下，热膜技术在水流测速中应用的有关技术问题。并利用从美国TSI公司进口的1050A恒温型热线／热膜流速仪测量了紊动射流和三峡溢流坝模型冲坑中掺气水流的脉动流速及紊动结构问题，获得了成功。     

空气辅助喷射闪急沸腾喷雾特性试验

在定容弹内利用高速相机和相位多普勒粒子分析仪（PDPA）研究了环境压力和燃油温度对空气辅助喷射系统喷雾特性的影响。试验环境压力的变化范围为0.01MPa到0.1MPa,燃油温度的变化范围为25℃到100℃。试验结果表明:随着环境压力的减小,燃油喷雾逐渐从冷态过渡到闪急沸腾状态,在喷嘴出口处喷雾气泡急剧增加。当环境压力小于0.02MPa时,喷雾处于闪急沸腾状态,液滴速度增加,粒径减小,在喷雾近端出现喷雾膨胀现象；随着燃油温度的上升,液滴表面张力减小,液滴易于破碎。当燃油温度达到100℃时,喷雾处于闪急沸腾状态,喷雾远端出现喷雾膨胀现象。      

基于空间两点的视觉自主着陆导引算法设计

为提高无人机着陆效率,从着陆速度向量场和导引律设计两方面研究改进。首先,基于椭圆设计速度向量场,实现飞行路程更短、机动性能要求更低的着陆轨迹。然后,基于像素坐标系与机体坐标系的关系,设计无人机的航迹方位角指令;以椭圆切线方向为参考,结合合作矢量特征,设计航迹倾斜角指令;利用图像信息,设计速度大小指令。最后,理论比较了传统轨迹与提出轨迹对方向机动性性能的要求,给出了轨迹参数与无人机方向机动性性能的关系。利用Simulink搭建系统仿真平台,计算满足要求的合作矢量特征。结果表明,无人机以曲线轨迹准确软着陆到目标,满足实际运用的需要。      

Six sigma robust design optimization for thermal protection system of hypersonic vehicles based on successive response surface method

Lightweight design is important for the Thermal Protection System(TPS) of hypersonic vehicles in that it protects the inner structure from severe heating environment. However, due to the existence of uncertainties in material properties and geometry, it is imperative to incorporate uncertainty analysis into the design optimization to obtain reliable results. In this paper, a six sigma robust design optimization based on Successive Response Surface Method(SRSM) is established for the TPS to improve the reliability and robustness with considering the uncertainties. The uncertain parameters related to material properties and thicknesses of insulation layers are considered and characterized by random variables following normal distributions. By employing SRSM, the values of objective function and constraints are approximated by the response surfaces to reduce computational cost. The optimization is an iterative process with response surfaces updating to find the true optimal solution. The optimization of the nose cone of hypersonic vehicle cabin is provided as an example to illustrate the feasibility and effectiveness of the proposed method.     

带攻角约束的高超声速飞行器自适应反步控制器设计

针对带攻角(AOA)约束的高超声速飞行器控制问题，提出一种基于非对称时变障碍函数的非线性自适应反步控制方法。首先，将飞行器模型化为严反馈形式，以反步法为基础进行控制器设计。然后通过光滑饱和函数对名义攻角指令信号进行限幅，并保证限幅信号的可导性，限幅产生的误差通过设计辅助系统进行补偿。进而使用障碍函数对攻角指令跟踪误差进行非对称时变约束。针对不确定性和干扰，设计新型自适应律对集中干扰上界进行估计并补偿。最终通过Lyapunov理论证明了闭环系统状态量一致最终有界并且攻角始终满足时变约束。仿真结果表明，本文方法能够在满足攻角约束基础上保证良好跟踪性能。